Fixed prices incl. GST · Balance due after the Certificate of Compliance09 887 0150 · hello@ev-charger.co.nz
Get my fixed price
Evnex E2 Core · installed

Evnex E2 Core, installed

The straightforward one. A 7.4kW single-phase charger with a 5-metre attached cable, which suits almost every New Zealand home on a normal single-phase supply.

Specs from Evnex, checked 15 September 2026

Specifications

Power
7.4 kW (32 A single phase)
Cable
5 m tethered, Type 2
Supply
Single phase
Charging source
Grid or solar
Warranty
4-year residential warranty from Evnex

From Evnex order page (E2 Core charger and installed price), checked 15 September 2026.

Who it suits

  • One EV or plug-in hybrid at home
  • A normal single-phase house supply
  • Parking within about 5 metres of where the charger goes

Included in this price

  • The charger: Supplied new, with the maker's residential warranty in your name.
  • Mounting: Fixed to a suitable wall in the spot agreed from your photos: timber-framed, weathertight, ground floor.
  • A dedicated circuit: Its own circuit and protection device in your existing switchboard, sized for the charger.
  • The cable run: Surface-mounted cable from the switchboard to the charger, up to the length set in your quote.
  • Testing and commissioning: The electrician tests the installation and sets the charger up on your phone.
  • The Certificate of Compliance: Issued by the registered electrician who did the work, and emailed to you. Your balance is only due after this.

Priced separately, in your quote

  • Switchboard work: An older board with no spare capacity, ceramic fuses or no RCD protection needs work before a charger goes on it.
  • Extra cable: Anything past the cable length in your quote, priced per metre.
  • Brick, block or concrete wall: Harder to fix to and to run cable through than timber framing.
  • Trenching: For a detached garage or carport where the cable has to go underground.
  • A new or upgraded supply: Going to three phase, or lifting your amperage, involves your lines company and is quoted separately.

Never charged unless it was named and priced before you paid.

What this costs in New Zealand today

E2 Core: the numbers we can source
FigureAmountSource
Our installed priceBeing set with our installerPublished once the installer's trade rate is agreed
Evnex, direct, installed$2,255Base estimate, Evnex order page, 15 September 2026
Evnex, charger only$999Evnex order page, 15 September 2026
Typical NZ range for this kind of install$1,500$2,500Home Charger NZ, reviewed 31 July 2026

All figures incl. GST. The full cost breakdown

Questions about the E2 Core

How much is an E2 Core installed in New Zealand?

We haven't published ours yet: it needs our installer's written trade price, and we won't post a number we can't honour. For reference, Evnex sells the E2 Core installed direct for $2,255 as a base estimate, and the published New Zealand range for this kind of job is $1,500 to $2,500. Send your photos and we'll email your fixed price as soon as it's set.

Will the E2 Core work with my car?

It has a tethered Type 2 connector, which is the standard AC connector on essentially every EV and plug-in hybrid sold new in New Zealand. The thing to check is your car's maximum AC charging rate, which for most cars is 7kW or 11kW.

Do I need three phase?

No. This is a single-phase charger and it runs on the supply almost every New Zealand home already has. Single phase vs three phase.

What if my switchboard needs work?

It's priced in the same quote as a named line, not discovered on the day. The published New Zealand range for switchboard work is $1,500 to $3,000, and a photo of your board with the door open tells us in seconds whether you need it. More on switchboards.

Who installs it, and do I get a certificate?

A registered electrician from our partner installer does all the electrical work, tests it and issues the Certificate of Compliance in their own name. We quote the job and hold the contract with you. We are not electricians. What the certificate is.

When do I pay?

A $500 deposit when you accept the price, fully refundable any time before installation starts. The balance is invoiced only after the Certificate of Compliance is issued.

Charger, install, certificate. One price.

Send your photos. Get one price.

Five phone photos and five minutes. We check them with our installer and email one fixed price for the charger, the install and the Certificate of Compliance. Nothing is charged until you accept it.