Fixed prices incl. GST · Balance due after the Certificate of Compliancehello@ev-charger.co.nz
Get my fixed price
Auckland

EV charger installation in Auckland

Pick a charger, send photos of your switchboard and where you park, and get one fixed price for the charger, the install and the Certificate of Compliance. A registered electrician from our Auckland installer does the wiring.

Waitlist: installer being contracted

Last checked 15 September 2026

How much does EV charger installation cost in Auckland?

Most 7kW home installs in Auckland come to $1,500 to $2,500, charger included. That is the range Auckland electricians publish for 2026, and it matches the national figure. The charger itself is the smaller variable; distance from the switchboard, access and whether the board has room move the price far more.

Published EV charger installation prices in Auckland, 2026
What you're paying forPublished priceSource
Straightforward 7kW install, charger near the board$1,500 – $2,500 (excl. GST)Level Up Electrical, Auckland
7kW smart charger unit only$800 – $2,000 (excl. GST)Level Up Electrical, Auckland
Long cable run or awkward accessadd $500 – $1,500Level Up Electrical, Auckland
Switchboard upgrade, where one is needed$1,500 – $3,000Level Up Electrical, Auckland; same range nationally
Separate Type B RCD, if the charger lacks DC detectionabout $400Level Up Electrical, Auckland
Evnex 7.4kW charger, installed (advertised offer)from $1,899 (incl. GST)PERL Electrical, offer dated 29 March 2026
Evnex 22kW X Series, installed (advertised offer)from $2,499 (incl. GST)PERL Electrical, same offer

Figures as published by each installer, checked 30 October 2026. Level Up's ranges are labelled excluding GST; PERL's are including GST. These are market prices, not our quote: ours is one fixed figure, given from your photos before you pay anything.

We price Auckland the same as the rest of New Zealand: the packages below, plus one fixed figure for your install, worked out from your photos before you pay. The full NZ cost breakdown.

What's different about installing an EV charger in Auckland?

Most of Auckland, from Franklin to Wellsford, sits on Vector's network, so Vector is the lines company that has to approve any new or larger connection. A standard 7.4kW charger on an existing single-phase supply usually needs nothing from them: it goes on a new circuit in your existing switchboard, and your electrician notifies the work as normal. It's only when the job needs a bigger supply or a move to three phase that Vector gets involved, and that step is quoted separately because their fees and timeframes are theirs, not ours.

Which areas of Auckland do we cover?

These six, and anywhere close to them: North Shore · Waitākere · Central Auckland · Manukau · Papakura · Franklin. If you're just outside that list, send the form anyway and say where you are. Quotes are free everywhere in New Zealand, and your local lines company is Vector.

What does a standard install cover?

The same six things in Auckland as everywhere else, on every package and in every quote: The charger · Mounting · A dedicated circuit · The cable run · Testing and commissioning · The Certificate of Compliance.

  • The charger: Supplied new, with the maker's residential warranty in your name.
  • Mounting: Fixed to a suitable wall in the spot agreed from your photos: timber-framed, weathertight, ground floor.
  • A dedicated circuit: Its own circuit and protection device in your existing switchboard, sized for the charger.
  • The cable run: Surface-mounted cable from the switchboard to the charger, up to the length set in your quote.
  • Testing and commissioning: The electrician tests the installation and sets the charger up on your phone.
  • The Certificate of Compliance: Issued by the registered electrician who did the work, and emailed to you. Your balance is only due after this.

Anything outside that is named and priced in the same quote, before you pay. Switchboard work is the common one, at $1,500 to $3,000 in New Zealand. How to tell if your board needs it.

Which charger packages can I get in Auckland?

The same three as everywhere else: Evnex E2 Core, installed, Evnex E2 Plus, installed, Evnex X22, three-phase, installed. The price doesn't change by region. Your switchboard, the cable run and whether you're single or three phase are what move it.

Evnex E2 Core

7.4 kW

Single phase · 5 m tethered cable

The straightforward one. A 7.4kW single-phase charger with a 5-metre attached cable, which suits almost every New Zealand home on a normal single-phase supply.

Fixed installed price coming soon

Typical NZ range $1,500–$2,500 · Typical NZ 7kW home install, charger and labour

See what's included
Evnex E2 Plus

7.4 kW

Single phase · 8 m tethered cable

The same 7.4kW charging as the E2 Core, with a longer 8-metre cable and both Wi-Fi and 4G, so it stays connected where the house Wi-Fi doesn't reach the garage.

Fixed installed price coming soon

Typical NZ range $1,500–$2,500 · Typical NZ 7kW home install, charger and labour

See what's included
Evnex X22

22 kW

Three phase required · Tethered Type 2

22kW on a three-phase supply. Only worth it if your home already has three phase and your car accepts more than 7kW of AC charging, which most don't.

Fixed installed price coming soon

Typical NZ range $2,500–$5,000 · Typical NZ 11–22kW install on an existing three-phase supply

See what's included

Ranges from Home Charger NZ, reviewed 31 July 2026. Evnex's own direct installed prices, checked 15 September 2026, are shown on each package page.

Questions about Auckland

How much does EV charger installation cost in Auckland?

Most 7kW home installs in Auckland come to $1,500 to $2,500, charger included, which sits inside the ranges local electricians publish and matches the national figure. What moves your price is your switchboard, the cable run and whether you're single or three phase. The full cost breakdown.

Do you install EV chargers on the North Shore?

The North Shore is inside our Auckland service area, so it's the same process and the same price list as the rest of Auckland. We're contracting our Auckland installer now, so today you can send photos and join the waitlist; we'll email you the fixed price when bookings open.

Will Vector need to be involved?

Usually not. A 7.4kW charger on an existing single-phase supply is a new circuit in your switchboard, which your electrician handles. Vector only comes into it if the supply itself has to change, for example a move to three phase or a bigger main fuse. That work is quoted separately, because the lines company sets the fee and the timeframe.

Can a normal electrician install an EV charger in Auckland?

Yes, any registered electrician can. A wall charger on its own circuit is prescribed electrical work, so it must be done by a registered electrician and signed off with a Certificate of Compliance, but there is no separate EV licence. Charger makers like Evnex certify installers for their warranty, which is why we use certified ones.

How long does an Auckland install take?

A standard install is normally a half-day job on site. Switchboard work adds time, and anything that needs Vector adds weeks, not days. Your quote says which of those you're in before you pay anything.

Who does the electrical work?

A registered electrician from our contracted installer for the region. They do all the electrical work, test it and issue the Certificate of Compliance in their own name. We quote the job, hold the contract with you and manage it. We are not electricians and hold no electrical registration.

When do I pay?

A $500 deposit only if you accept the price, fully refundable any time before installation starts. The balance is invoiced once the Certificate of Compliance is issued. How it works.

Charger, install, certificate. One price.

Send your photos. Get one price.

Five phone photos and five minutes. We check them with our installer and email one fixed price for the charger, the install and the Certificate of Compliance. Nothing is charged until you accept it.