Fixed prices incl. GST · Balance due after the Certificate of Compliancehello@ev-charger.co.nz
Get my fixed price
Guide

Type 1 vs Type 2 EV chargers in NZ: which plug does your car need?

Type 2 is the standard AC charging plug in New Zealand: public AC chargers and most home chargers use it, and NZ-new EVs have a Type 2 inlet. Type 1 is the older plug found on many Japanese-import EVs and plug-in hybrids. If your car has a Type 1 inlet, you need either a Type 1 tethered charger or a Type 2-to-Type 1 cable.

Last checked · About 6 minutes to read · Written by the team at EV Charger Co.

NZ standard AC plug
Type 2
7 pins, rounded with a flat top
Older Japanese imports
Type 1
5 pins, round with a latch
DC fast charging
CCS2 or CHAdeMO
Not used at home

New Zealand's EV fleet is a mix of cars sold new here and cars imported used from Japan and the UK, so not every car has the same socket. Getting the plug right matters most when you buy a tethered home charger, because the cable is fixed to the wall unit.

What's the difference between Type 1 and Type 2?

They are two different AC charging plugs. Type 1 (SAE J1772) came from the US and is also used in Japan; it's round, with five pins and a latch on top. Type 2 (IEC 62196, often called Mennekes) is the European standard; it's round with a flat top edge and seven pins. NZ Transport Agency guidance lists Type 2 as the AC connector for public charging here.

EV plug types you'll see in New Zealand
PlugChargingWhere you'll find it
Type 2 (Mennekes)AC, home and publicNZ-new EVs and most European and recent models; public AC chargers
Type 1 (J1772)ACMany Japanese-import EVs and plug-in hybrids, e.g. older Nissan Leafs and Mitsubishi Outlander PHEVs
CCS2DC fast chargingType 2 inlet with two large pins below; most recent models
CHAdeMODC fast chargingJapanese models such as the Nissan Leaf; being phased out on new cars

Connector standards from NZ Transport Agency. Check your own car's inlet before buying anything.

How do I tell which plug my car has?

Open the charging flap and count the pins. Five pins in a round socket is Type 1. Seven pins in a socket with a flat top edge is Type 2. If there's a second, larger socket with two big pins, or one with two big pins underneath the Type 2, that's for DC fast charging (CHAdeMO or CCS2) and doesn't affect which home charger you need.

Can I use a Type 2 charger with a Type 1 car?

Yes, with the right cable. Public AC chargers in New Zealand are usually untethered Type 2 sockets, so Type 1 drivers carry a Type 2-to-Type 1 cable. At home, if your charger has a fixed Type 2 cable, a Type 1 car can't plug in directly. Don't bodge it with an adaptor: WorkSafe's guidance treats charging adapters not from the vehicle maker or the charger supplier as unsafe.

  • A tethered Type 1 charger: the cable on the wall unit has a Type 1 plug. Neat, but if you later buy a Type 2 car, the cable needs changing.
  • An untethered (socketed) charger: the wall unit has a Type 2 socket and you use a Type 2-to-Type 1 cable. Works with any car you own later.
  • A tethered Type 2 charger with a Type 2 car: the simplest setup, and what most new buyers end up with.

Which home charger should I buy if I'll change cars?

If you drive a Type 1 car now but expect your next one to be Type 2, as most cars sold new in New Zealand are, think about which cable to fit before the install. Some tethered chargers can have the cable swapped later by an electrician, at a cost. An untethered charger avoids that, at the price of carrying a cable in and out. Tell us your current car and your plans, and we'll price whichever fits.

Our charger packages come with tethered Type 2 cables. For the charger power to choose, see single phase vs three phase, and for the total installed price, the EV charger installation cost guide.

Frequently asked questions

What type of EV charger plug is used in NZ?

Type 2 is the standard AC plug in New Zealand, used on public AC chargers and NZ-new EVs. Many Japanese-import EVs and plug-in hybrids have the older Type 1 plug.

Is the Nissan Leaf Type 1 or Type 2?

Japanese-import Nissan Leafs generally have a Type 1 AC inlet and a CHAdeMO fast-charge inlet. Check your own car's charging flap: five pins in a round socket is Type 1.

Can I charge a Type 1 car at a Type 2 public charger?

Yes, with a Type 2-to-Type 1 cable. Public AC chargers are usually untethered Type 2 sockets, so Type 1 drivers bring their own cable.

Should I use an adaptor to plug a Type 1 car into a Type 2 tethered charger?

No. WorkSafe's guidance lists charging adapters that aren't from the vehicle maker or charger supplier as unsafe. Use a proper cable or a charger with the right plug. The same rules cover extension cords and Type 2 extension cables.

Do I need a different charger for a plug-in hybrid?

Only if its inlet differs. Many Japanese-import plug-in hybrids are Type 1, and their onboard chargers accept less power, so a 7.4kW single-phase charger is more than enough.

Does plug type affect charging speed?

Not much at home. AC speed is limited by your supply and the car's onboard charger. Type 1 is single-phase only, so it tops out at 7.4kW; Type 2 can also carry three phase.

Charger, install, certificate. One price.

Send your photos. Get one price.

Five phone photos and five minutes. We check them with our installer and email one fixed price for the charger, the install and the Certificate of Compliance. Nothing is charged until you accept it.